In December 2023 our crew installed Superbolt mechanical tensioners at the Dos Bocas maritime terminal in Paraíso, Tabasco. A marine terminal moves hydrocarbons between ships, tanks and pipelines, and its flanged joints work under pressure, vibration and a salty atmosphere that punishes any joint that loses preload.

Why Superbolt and not a hammer wrench
A Superbolt threads onto the existing stud in place of the hex nut. Instead of turning one large nut against friction, a ring of small jackbolts is tightened with a hand torque wrench. The stud ends up in pure tension, with no torsion and an even load around the whole bolt circle.
- Preload accuracy of about ±5–10 %, against ±30–40 % or more with torque methods (figures published by Nord-Lock Group).
- No sparks and no impact tools in a classified area.
- Reusable: it comes off with the same wrench at the next maintenance.
What came next
The same method is the one that cut maintenance on offshore compression modules from 48 hours to 8. Read the PEMEX case
Terminal, refinery or platform joints?
We supply and install Superbolt in Mexico and the U.S.