Hydraulic nuts and bolt tensioners that load every stud of a joint at once: turbine casings closed in hours instead of shifts, and casing bolts tightened to an accurate load. We rent the kits from Texas and we supply the tooling.
A Boltight tool pulls the stud with hydraulic pressure instead of turning a nut against friction. With every tool on one manifold, the whole joint is loaded simultaneously and evenly.
Closure in hours, with minimal training.
The same load on every stud, at the same time.
Rent the kit or have our technicians run it.


Even load. Flat joint. Hours, not shifts.
A steam casing that has to be closed to be measured and a gas casing whose bolts have to be tensioned are different jobs, with different tools. Pick yours:
Hydraulic closure, Superbolt tensioners and an internal seal for the joint that leaks across the 501F fleet. 35 installations and re-installations from April 2025 to June 2026.
How it is installed60 closure nuts from 2½ to 7 inches at 2,500 bar, to close the casing for tops-on readings without heating the permanent bolts.
See the D11 kitCasing tensioners from 1 to 2¼ inch, a 1,500 bar air-driven pump and hydraulic pullers for body-bound bolts.
See the 7FA kitCasing tensioners in 1, 1¼ and 1¾ inch with a 1,500 bar air-driven pump.
See the 7EA kitInventory, what ships in each kit, rental only or with advisors, and when buying makes sense.
Go to rentalsOn the 501F the hydraulic closure hands its load to Superbolt tensioners. Hand wrench, no pump.
See Superbolt| Where | Why Boltight |
|---|---|
| Gas turbine casings (GE 7FA, 7EA) | Bolts tightened and loosened fast and to an accurate load; seized fitted bolts come out with hydraulic pullers |
| Steam turbine casings (GE D11) | Temporary closure for tops-on readings without heating or torquing the permanent bolts |
| Siemens 501F 4-way joint | Vertical and horizontal positions loaded at the same time, misalignment corrected under load |
| Wind towers and foundations | Typhoon+ tensioners for full bolt circles; stocked in North America and shipped in 48 hours |
| High-pressure flanges and BOP stacks | Even load on metal ring gaskets, so the pressure test passes without re-tightening |
Wind and BOP: application examples from Nord-Lock Group, maker of Boltight and Superbolt.


Rental only, or tool plus advisors. Same kit, calibrated and certified.
The kit ships calibrated, with pressure-test certificates and packing list. Your crew runs it; we answer the phone during the outage.
Our people arrive the day before casing work: kit inventory against the packing list, certificates handed over, safety induction done and hoses laid out.
For fleets with several units of the same model and a crew that uses the kit every season. Hydraulic nuts, tensioners, pumps, hoses and spares.
Seals, pressure tests and hose certification between outages, so the kit is ready for the next window.
More detail, field photos and the full 501F procedure in the Boltight presentation: info.giman.com/bolting ↗
Both. We rent the casing kits we keep in stock (GE D11, 7FA, 7EA and the 501F 4-way joint solution) and we supply Boltight hydraulic nuts, tensioners, pumps and hoses for purchase when a plant or a fleet uses them every season. If renting makes more sense for you, we will tell you.
Yes. Rental only: the kit ships calibrated, with its pressure-test certificates and packing list, and your crew runs it. Or tool plus our field advisors, who have run the same sequence on other units.
In Texas: 2 GE D11 kits, 4 GE 7FA kits and 2 GE 7EA kits, plus crews for the Siemens 501F 4-way joint. We also take them to Mexico.
Both are hydraulic, but the wrench turns the nut and part of the effort goes into friction, so preload depends on lubrication and sequence. The tensioner stretches the stud directly, without friction, and with a manifold it loads several studs at once, so the flange closes flat.
Five things: unit and revision, bolt schedule and joint drawings, outage window and sequence, who handles crane and rigging, and site access rules. With that we send back a one-page scope ready for the outage manager.
When two units of the same model open the same week, whoever asks first keeps the kit. Tell us and we reserve the dates.
info@giman.com · +1 832 408 9841 (WhatsApp)
Cleveland, Texas · Mexico · Canada