Products / Nord-Lock
Nord-Lock · wedge-locking washers

Nord-Lock washers.
Bolts that stay tight under vibration.

A pair of washers that locks the bolt by geometry, not by friction. For pumps, compressors, crushers, structures and anything that shakes. Supplied in Mexico and the United States.

How it works

Two washers, cams inside, teeth outsidethe bolt locks itself

Most bolted joints come loose the same way: vibration and load reversals turn the nut back a little at a time until the preload is gone. Nord-Lock blocks that rotation with a wedge.

  1. Fit the pairUnder the nut or the bolt head, cams facing each other.
  2. Tighten as usualThe outer serrations bite into the nut and the mating surface.
  3. Vibration tries to loosen itMovement can only happen between the cams, and the cam angle is larger than the thread pitch.
  4. Tension goes up, not downThe wedge effect keeps the preload. No glue, no lock wire, no re-tightening rounds.
Nord-Lock wedge-locking washer pair
Nord-Lock wedge-locking washer pair
Nord-Lock washers in several sizes
Nord-Lock washers in several sizes
Bolted flange under vibration
Bolted flange under vibration

It locks by geometry, not by friction.

Where it is used

Anything that shakesand cannot stop to be re-tightened

WhereWhy Nord-Lock
Pumps and compressorsBases and casings keep their preload under constant vibration
Mining: crushers, screens, millsImpact and load reversals all shift long
Steel structures, bridges, towersFewer inspection and re-tightening rounds
Drilling: mud pumps, top drive, drawworksHolds preload together with Superbolt tensioners
Rail and heavy vehiclesVibration-proof joints without lock wire

Pairs with Superbolt

Large bolts: Superbolt for the preload, Nord-Lock to keep it. Superbolt →

Ordinary tools

Fitted and removed with the same wrench you already use.

Nord-Lock in English · GIMAN channel
Nord-Lock in English · GIMAN channel
Nord-Lock in Spanish · GIMAN channel
Nord-Lock in Spanish · GIMAN channel
Questions

About Nord-Lock washerswhat buyers ask

Why does a wedge-locking washer not come loose under vibration?

Nord-Lock washers come in pairs: cams between the two halves and serrations on the outside that bite into the nut and the mating surface. The cam angle is larger than the thread pitch, so if vibration tries to turn the nut loose, the bolt tension increases. It locks by geometry, not by friction.

Can they be reused?

Yes. The pair is removed and refitted with ordinary tools; we check the serrations and cams before refitting.

Do I need a special torque?

The joint is tightened to its normal design preload. The washer keeps that preload; it does not replace a correct tightening procedure. For large bolts we combine it with Superbolt.

Do you supply in Mexico?

Yes. We supply Nord-Lock washers and Superbolt tensioners in Mexico and the United States for pumps, compressors, structures, mining and rail. We work as a field execution channel for Nord-Lock Group.

Quote

Tell us bolt size, material and quantity

Metric or inch, steel or stainless, and where it goes. We reply with the right washer and delivery time.

  • Supply in Mexico and the U.S.

info@giman.com · +1 832 408 9841 (WhatsApp)
Cleveland, Texas · Mexico · Canada

¡Contáctanos!