What we install, where and with what result: offshore platforms, turbine casings, natural gas stations and the people who do the work. Real numbers, real photos.
Spring 2027 outages are being planned now. In Texas we have 2 GE D11 kits, 4 GE 7FA kits and 2 GE 7EA kits, plus crews for the Siemens 501F 4-way joint. Also in Mexico.
Read the storyFitted coupling bolts are tight on purpose; the problem comes when they have to come out. In 2025 we installed expansion bolts on a steam turbine in Baytown, Texas: they go in and come out without seizing.
Read the storyTwo contracts awarded by CFE, 2022 and 2023: Superbolt multi-jackbolt tensioners supplied and installed on feedwater and circulating pumps at the Carbón II power plant in Coahuila.
Read the storyPig traps, filtration, metering and pressure regulation: four skids that together make a gas station. INOVA builds them in Santa Catarina, N.L., and we take them to projects in Mexico.
Read the storyCasing tooling works a few days per outage cycle. What buying really includes, how rental turns it into per-project line items, and when each option makes sense.
Read the storyFrom the pre-job review to the as-left report: the four steps of the Nord-Lock / Superbolt 4-way joint reinstall on a W501F, what stays with the prime, and what the plant receives.
Read the storyHow a hydraulic closure system closes the D11 upper shell for clearance and distortion readings, and why the locking collar on each hydraulic nut makes the readings trustworthy.
Read the storyFrom April 2025 to June 2026 our crews installed and re-installed the 4-way joint solution on 35 occasions on W501F FD3 and FD4 units in the U.S. and Canada, without extending the outage.
Read the storyEvery leak at start-up meant re-tightening and deferred production. With multi-jackbolt tensioners, maintenance on critical offshore equipment dropped from 48 hours to 8, with 15 consecutive interventions and no failures.
Read the storyFebruary 17–20, 2025: the team from Vancouver, Houston, Villahermosa and Mexico City met in Monterrey for specialised training on Siemens 501F turbines and the solutions we install.
Read the storyFebruary 11–13, 2025: we walked POWERGEN in Dallas to see what is new in power generation and to talk with the plants and contractors that run outages in North America.
Read the storyFebruary 2024, San Lorenzo Potencia, Puebla: we supervised the quality of the Nord-Lock solution with mechanical tensioners on a Siemens 501F casing. It was the start of what became 35 installations in North America.
Read the storyDecember 2023, Paraíso, Tabasco: we installed Superbolt mechanical tensioners on terminal joints that cannot leak, tightened with a hand wrench, without hammer wrenches or hot work.
Read the storyOctober 2024: we took part in rehabilitating the gas line that feeds a combined-cycle plant in Campeche. Without fuel gas at the right pressure and cleanliness, the plant does not run.
Read the storyWe don’t box the leak. We close the joint.
Hydraulic nuts and tensioners that load every stud at once. GE D11, 7FA and 7EA casing kits for rent from Texas, and the Siemens 501F 4-way joint.
See Boltight and the kitsTension with a hand wrench on the joints that cannot leak. PEMEX case: 77 % less time and zero re-tightening.
See SuperboltWedge-locking washers that keep bolts tight under vibration, by geometry and not by friction.
See Nord-Lock2 D11, 4 7FA and 2 7EA kits in Texas.
Check availabilityTell us the job and the date. We answer within one business day.
info@giman.com · +1 832 408 9841 (WhatsApp)
Cleveland, Texas · Mexico · Canada