Products / Boltight
Boltight · hydraulic bolt tensioning

Boltight hydraulic tensioners.
For sale and for rent.

Hydraulic nuts and bolt tensioners that load every stud of a joint at once: turbine casings closed in hours instead of shifts, and casing bolts tightened to an accurate load. We rent the kits from Texas and we supply the tooling.

How it works

Stretch the stud, then lock itOne pump, every bolt at the same time

A Boltight tool pulls the stud with hydraulic pressure instead of turning a nut against friction. With every tool on one manifold, the whole joint is loaded simultaneously and evenly.

  1. Fit the hydraulic nutsThey go on the existing studs. No casing modifications.
  2. Connect one pumpLink hoses and a manifold join every position to a single air-driven pump.
  3. PressuriseAll studs stretch together to the same load. The joint closes flat.
  4. Lock or transfer the loadThe locking collar holds the closure for the readings, or the load is handed to permanent tensioners and released.

Fast

Closure in hours, with minimal training.

Even

The same load on every stud, at the same time.

Flexible

Rent the kit or have our technicians run it.

Boltight hydraulic nut: fitted on the stud and pressurised
Hydraulic closure on a Siemens 501F
Hydraulic closure on a Siemens 501F
Boltight kit packed for shipping
Boltight kit packed for shipping

Even load. Flat joint. Hours, not shifts.

Where it is used

Wherever a joint must close flatand to a known load

WhereWhy Boltight
Gas turbine casings (GE 7FA, 7EA)Bolts tightened and loosened fast and to an accurate load; seized fitted bolts come out with hydraulic pullers
Steam turbine casings (GE D11)Temporary closure for tops-on readings without heating or torquing the permanent bolts
Siemens 501F 4-way jointVertical and horizontal positions loaded at the same time, misalignment corrected under load
Wind towers and foundationsTyphoon+ tensioners for full bolt circles; stocked in North America and shipped in 48 hours
High-pressure flanges and BOP stacksEven load on metal ring gaskets, so the pressure test passes without re-tightening

Wind and BOP: application examples from Nord-Lock Group, maker of Boltight and Superbolt.

GE D11: temporary hydraulic closure for tops on / tops off
Boltight Typhoon+
Boltight Typhoon+
Boltight D11 hydraulic closure system
Boltight D11 hydraulic closure system

Rental only, or tool plus advisors. Same kit, calibrated and certified.

How we work

Two ways to get the kiton site, on time

Rental only

The kit ships calibrated, with pressure-test certificates and packing list. Your crew runs it; we answer the phone during the outage.

Tool plus field advisors

Our people arrive the day before casing work: kit inventory against the packing list, certificates handed over, safety induction done and hoses laid out.

Purchase

For fleets with several units of the same model and a crew that uses the kit every season. Hydraulic nuts, tensioners, pumps, hoses and spares.

Repair, calibration and certification

Seals, pressure tests and hose certification between outages, so the kit is ready for the next window.

More detail, field photos and the full 501F procedure in the Boltight presentation: info.giman.com/bolting ↗

Questions

What plants ask usbefore renting a kit

Do you sell Boltight tools or only rent them?

Both. We rent the casing kits we keep in stock (GE D11, 7FA, 7EA and the 501F 4-way joint solution) and we supply Boltight hydraulic nuts, tensioners, pumps and hoses for purchase when a plant or a fleet uses them every season. If renting makes more sense for you, we will tell you.

Can I rent the tool without technicians?

Yes. Rental only: the kit ships calibrated, with its pressure-test certificates and packing list, and your crew runs it. Or tool plus our field advisors, who have run the same sequence on other units.

Where are the kits?

In Texas: 2 GE D11 kits, 4 GE 7FA kits and 2 GE 7EA kits, plus crews for the Siemens 501F 4-way joint. We also take them to Mexico.

What is the difference between a hydraulic torque wrench and a tensioner?

Both are hydraulic, but the wrench turns the nut and part of the effort goes into friction, so preload depends on lubrication and sequence. The tensioner stretches the stud directly, without friction, and with a manifold it loads several studs at once, so the flange closes flat.

What do you need from us to quote?

Five things: unit and revision, bolt schedule and joint drawings, outage window and sequence, who handles crane and rigging, and site access rules. With that we send back a one-page scope ready for the outage manager.

Quote

Send us unit, revision and outage window

When two units of the same model open the same week, whoever asks first keeps the kit. Tell us and we reserve the dates.

  • Rental only or with advisors
  • Texas and Mexico
  • Reply within one business day

info@giman.com · +1 832 408 9841 (WhatsApp)
Cleveland, Texas · Mexico · Canada

¡Contáctanos!